Crane Control System

Product Details:

Master Controller are of cam type where in contracts are actuated by individual cams mounted onoperated shaft. These controllers are used for remote operation of contractors equipment controlling heavyduty E. O. T. cranes & rolling mill drives. The controllers are made in dust proof enclosure in IP-54 degree ofprotection, up to 6 notches either side with maximum 24 contacts as per desired sequence with spring returnarrangements & dead man''s handle arrangement are available. And master controllers are compact upto 4-0-4step suitable for Hoists-Grab, CT-LT maximum contact 16 per motion with spring return arrangements.Technical Data:• Body Material : Sheet Steel / Aluminum Die Cast• Degree of Protection : P-41/IP-54• Mounting Position : Horizontal / Vertical• Contact Material : Silver Cadmium• Rated Voltage Insulation : 500 V.A.C• Thermal Test Current : 10 Amps• Cable entries : 2x20 2x60 standard conduit• Frequency of Operation : 1000 switching per hour• Contacts : Single / Double break• No. of Contacts : 24 maximum• No. of steps : 7-0-7 maximum• Optional : Spring return / dead man''s handle arrangement
With regards,EMBICON TECH HUB

Product Details:

The Anti-collision system is a safety device to avoid to collision of two
electric overhead travelling cranes working on the same rails. For one pair of cranes two
sets of anti-collision systems are required. Each set consists of an Emitter/sensor
module and a Reflector.
 
The System works on the principle of retro-reflective infrared waves. It
consists of an emitter and sensor module and a special reflector. The emitter emits the
infrared waves in the direction of the reflector. The reflector reflects these infrared
waves back to the sensor. The sensor senses the presence of these reflected infrared
waves and activities an alarm signal and stops/reduces the speed of the cranes.
 
Thus if the two cranes are away from each other then the reflected waves
will not reach the sensor and the cranes operate normally. The sensing distance is
adjustable between 3 to 10 meters. The anti collision system is specially designed for the
 
crane application and is suitable for the continuous duty.

Product Details:

Embicon Push Button Pendant Station are available to fit a wide variety of applications from the simplest one motion hoist to three-motion cranes with multiple switches and accessories.

 

Features:

• Compact safety yellow enclosure
• Two-piece enclosure simplified field wiring
• Easy to read legend plates
• Neoprene Booted buttons
• NEMA 4x Enclosure rating
• Degree of protection IP65.
• -15°C to 70°C (5°F to 160°F) operation temperature
• UL Listed
• Contacts rated 5A at 120 VAC
• 100 G shock resistance
• Indoor or outdoor use

Pendant Station Details:

Product Details:

The Motorized Cable Reeling Drum will be complete with Chain & Sprocket, Torque Regulator,Motor with Gearbox, Slip rings and Carbon Brushes but without the supply of the cable.Cable Type :- EPR/TRS Flexible Cable.CRD Model :- TC/CRD/400/250/800.Cable Size / Type :- 5 Core X 10sq.mm.Cable Length :- 100 Mtrs.Type of Payout :- Horizontal.Type of Feed :- End Feed.Machine Speed :- 10 Mtrs/min.

Product Details:

The Anti collision System is designed to avoid the collision of two adjacent cranes in the same bay running on the same rails. This system when installed on the two adjacent cranes will avoid the collision of two cranes. The system works on the principle of retro -reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector.The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activates an alarm signal and stops / reduces the speed of the crane. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The distance between the reflector and the sensor to detect the presence of infrared waves can be adjusted with the help of the potentiometer provided on the system. The maximum distances between the two cranes to generate the alarm signal can be maximum 10 meters. The anti collision system is specially designed for the Crane application and is suitable for the continuous duty. Each system consists of an Emitter/sensor module and a Reflector. The emitter/ sensor module is installed on one crane and the corresponding reflector is installed on the opposite crane. Hence to avoid the collision between two adjacent cranes two sets of each emitter/sensor module and reflectors are required.

Product Details:

We are manufacturing Current collector for DSL conductor shrouded bus bar. Current collector are available in different ampere capacity 60 AMP, 80AMP, 100AMP, 125AMP, 250AMP. We are also manufacturing Current Collector For Enclosed Jointless for angle type MS DSL bus bar in different Current capacity 250AMP, 500AMP, 800AMP, 1000AMP.

Product Details:

Double Decker Cable Trolley For EOT crane festoon system. for heave duty cable and crane application

Product Details:

Master Controller are of cam type where in contracts are actuated by individual cams mounted onoperated shaft. These controllers are used for remote operation of contractors equipment controlling heavyduty E. O. T. cranes & rolling mill drives. The controllers are made in dust proof enclosure in IP-54 degree ofprotection, up to 6 notches either side with maximum 24 contacts as per desired sequence with spring returnarrangements & dead man''s handle arrangement are available. And master controllers are compact upto 4-0-4step suitable for Hoists-Grab, CT-LT maximum contact 16 per motion with spring return arrangements.Technical Data:• Body Material : Sheet Steel / Aluminum Die Cast• Degree of Protection : P-41/IP-54• Mounting Position : Horizontal / Vertical• Contact Material : Silver Cadmium• Rated Voltage Insulation : 500 V.A.C• Thermal Test Current : 10 Amps• Cable entries : 2x20 2x60 standard conduit• Frequency of Operation : 1000 switching per hour• Contacts : Single / Double break• No. of Contacts : 24 maximum• No. of steps : 7-0-7 maximum• Optional : Spring return / dead man''s handle arrangement
With regards,EMBICON TECH HUB

Product Details:

As an acclaimed entity of this domain, we are actively involved in offering a wide range of Cable Reeling Drum. The offered cable reeling drums can be used for horizontal and vertical recovery of cables, horizontal centenaries of cables, vertical pull & DC magnet reels. The offered cable reeling drums are appreciated for their optimum grade quality, enhanced service life and effective performance that offered product one step ahead of the competitors in the market. A series of quality tests is conducted on offered cable reeling drums by skilled professionals at every phase of processing.
 
Features:

Smooth operation

Sturdy design

Long working life

Product Details:

Product Details: We are one of the trustworthy names in the industry in presenting a wide gamut of 32 Amp Extension Cable Reel to our esteemed customers. The offered products are designed using the finest quality material and sophisticated technology. In addition to this, these products are durable in nature and presented to the patrons in many technical specifications.

Features:

• Damage resistance
• Long life
• High strength

Product Details:

We are successfully ranked amongst the trustworthy entities offering a wide range of Cable Trolley. This is manufactured using high quality stainless steel alloys and advanced technology. The precision engineering provided in cable trolley offer accurate dimension and aligned functionality to the trolley. Furthermore, this trolley is developed adhering to industry standards, which assure high durability and reliable performance to the users. In addition, clients can also opt for custom trolley according to the business or projects requirements.

Features:

• Operation is simper and easier
• No adjustment of the wheel
• No adjustment is required in the pulley

Applications:

• Crane making companies
• Trolley and lift making firms
• Loading and unloading companies

Product Details:

The products offered by us are highly praised for their high performance and longer working life, available in different specifications as per demanded specifications from our clients. These products are stringently checked under the supervision of our skilled professionals in order to ensure flawless supplies at our client's end. In addition to this, these products are used...

Product Details:

DSL Busbar

Product Details:

Giovenzana International B.V. manufactures worm gear limit switches which are equipped with 300mm rods from three up to five positions. These control switches with rotary gears offers a revolution rate from 12 rpm up to 200 rpm with four or six micro-switches.

Product Details:

Anti Collision device for EOT Crane for safety and avoid damage of crane

Product Details:

The box which contains the resistors of different values for estimating and comparing the resistance is known as the resistance box. The accuracy of the resistance box is very high. The main application of the resistance box is to control the specific value of current to flow through the circuit.

Product Details:

EMBICON takes huge delight in its massive business popularity that has risen due to quality inspired manufacturing of Resistance Boxes, Anti Collision Devices, Festoon Systems and more. We are considered one of the preferred business names in the market not solely because of our powerful financial position but bulk production capability. We, as a manufacturer get huge orders for offered product line because of superior quality standards. Our product line that consists Cable Trolleys, Nylon Gear Couplings, EOT Crane Wheels, etc., undergo several quality and performance based tests at our facility. We do stringent product testing on range to enhance customersa trust over our range.

Product Details:

Copper Sheo for EOT Crane best Quality and long life warrent in this product

Product Details:

Brake drum for eot crane

Product Details:

Brake Drum with Gear Couple

Product Details:

CI Pin Bush TypeCI

Product Details:

Brake drum for eot crane brakes

Product Details:

We offer Brake Drum Couplings, to our clients that is manufactured using qualitative material. Brake drum couplings are also gear 

Product Details:

Embicon Tech Hub make Spring operated cable reeling drums are powered with springs and has an automatic rewind feature which provides an extremely simple way of supplying power to machines such as cranes and hoists. These spring cable reeling drums are used for both AC and DC applications. These reels recovers and store the cable in multiple layerson the drum. Standard reels are supplied for the cable fed in the clockwise direction, when viewed from the slipring side. The same can be provided for anticlockwise feed of cable also. These reels are extremely simple to mount, and can be mounted on the structure with the help of a supporting flange - If no suitable structure is available, then Unbalanced Vibrator Motor a bracket can be connected to the flange and this can be fixed to the floor or tray etc. The springs used in these reels are manufactured from the highest quality materials and are of clock spring type. A wide range of characteristics can be obtained by assembling these springs singly or in series or in parallel. Spring operated cable reeling drums can also be supplied with geared rotary limit Switch arrangement.