Thruster Brakes

Product Details:

AC DISC BRAKES Fail Safe very compact and modern in design. Foundation is not necessary as they are directly mounted on non-driving end shaft of the motor. It consist of liner plates (Brake Disc) with square hole at the center. One corresponding piece of square hub is supplied with the brake. This hub is keyed to the motor shaft and the liner plate is free on this hub. Normally liner plate is gripped between two discs with the help of spring pressure. They work on 230/415 V.A.C. When the current is supplied to the brake, one disc is attracted by electromagnet against spring pressure and the liner plate is released. Thus the brake is ?off ?. Once the brake is set it dose not required adjustments or maintenance. When the liner plates wears with the use then only air gap is to be maintained periodically. An arrangement to release the brake manually could be provided on request.

Product Details:

We are Leading Manufacturer & Exporter of Industrial Brake. Thruster Brakes is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a per-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster.

 

We are manufacturer of superior quality range of AC and DC Fail Safe Brake. We regularly interact with the customers and ensure that their needs are fulfilled in the way they desire. Normally liner plate is gripped between two discs with the help of spring pressure. Our A.C & D.C. fail safe disc brakes are manufactured to International standards and are with high operating frequency & reliability.

 

We are leading manufacturer of AC Solenoid Brake that are suitable for AC supply up to 400 to 440 volts and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

Product Details:

We are Leading Manufacturer & exporter of Electro hydraulic Thruster Brake. Thruster Brakes is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a per-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster.

Thruster brakes are suitable for 400 /440volts.

• 3 Phase, 50 Hz A.C. Supply. Brake Drum Diameter-100-600 MM.
• Braking torque - 6Kg.M. - 580 Kg.M.
• Easy installation & maintenance
• Reverse action version available
• Self adjusting lining wear mechanism.
• Hydraulic / pneumatic actuator.
• Gentle action, simple control, high performance.

Product Details:

Crane brake shoe for all kinds of brakes used in EOT Crane for industrial use. 

Product Details:

Embicon Tech Hub is the leading manufacturer of Electro hydraulic Thruster Brake. Our mill duty Thruster Brakes are suitable for 400/440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 600 mm dia. Higher sizes can also be supplied against specific requirements. The brake is applied by the tension of the compressed springs mounted vertically between the thruster and brake lever. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted.

The brake lever at the thruster begins to move when the first lever reaches the stop on the brake base member The thruster and the brake are so adjusted as to reserve about 1/3 of the stroke for compensation of the wear of the brake linings.

Thruster brakes are suitable for:

• 400 /440volts, 3 Phase, 50 Hz A.C.
• Supply Brake Drum Diameter-100-600 MM
• Braking torque – 6Kg.M. – 580 Kg.M.
• Easy installation & maintenance
• Reverse action version available
• Self adjusting lining wear mechanism
• Hydraulic / pneumatic actuator
• Gentle action, simple control, high performance.

Additional Information:

• Item Code: MDT
• Delivery Time: 1 WEEK
• Packaging Details: WOODEN PACKING

Product Details:

Thruster brake for eot crane as per specifation we are manufacturing

Product Details:

Embicon is the leading manufacturer of Electro hydraulic Thruster Brake. Our mill duty Thruster Brakes are suitable for 400/440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 600 mm dia. Higher sizes can also be supplied against specific requirements. The brake is applied by the tension of the compressed springs mounted vertically between the thruster and brake lever. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted.

The brake lever at the thruster begins to move when the first lever reaches the stop on the brake base member The thruster and the brake are so adjusted as to reserve about 1/3 of the stroke for compensation of the wear of the brake linings.

Thruster brakes are suitable for:

400 /440volts, 3 Phase, 50 Hz A.C.

Supply Brake Drum Diameter-100-600 MM

Braking torque – 6Kg.M. – 580 Kg.M.

Easy installation & maintenance

Reverse action version available

Self adjusting lining wear mechanism

Hydraulic / pneumatic actuator

Gentle action, simple control, high performance.

Product Details:

Electro Magnetic Disc Brake

Product Details:

We are Leading Manufacturer & exporter of Electro hydraulic Thruster Brake. Thruster Brakes is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a per-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster.

Thruster brakes are suitable for 400 /440volts.

• 3 Phase, 50 Hz A.C. Supply. Brake Drum Diameter-100-600 MM.
• Braking torque - 6Kg.M. - 580 Kg.M.
• Easy installation & maintenance
• Reverse action version available
• Self adjusting lining wear mechanism.
• Hydraulic / pneumatic actuator.
• Gentle action, simple control, high performance.

Product Details:

AC solenoid brake/shoes brake