Procees Instrument

Product Details:

Embicon offers new generation Safety Light Curtains/Safety Guards based on advanced micro controller technology. These are available in two types. Parallel Beam (LC:type II beam) and Cross Beam (LX :type x beam). For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.

Features:
Offers Safety Standard Type 4 when used with Controller.- Easy to install & can be mounted in any position. Vertical / Horizontal.- Non-Critical alignment between Emitter & Receiver.- Blanking / By-Passing individual channel is provided through software.- System operation is unaffected by mains power fluctuations.- Machine OFF if screen is too dirty or oily.- Barrier operates on cyclic scanning photo-electric infra-red techniques.- Various barrier heights are available for covering 90 mm to 1890 mm .- Higher covering heights available upon request.- Use of solid state components & special construction technique ensures that barrier is not affected by normal vibrations & shocks.- Sensor connections are provided through plug in connectors.- Self Checking Circuitry with two outputs continuously monitors failure of any of the beam in the system and stop the machine if failure is detected.LED Indications are provided for status indication of each channel.LED indications are also provided for each output.- Choice for suitable Control Unit available as per different working conditions.- Flexible fixing arrangements to suit individual requirement. Increases productivity while maintaining required safety.

Specifications: Power Supply:12 - 24 Volts DCSupply Protection:Reverse Polarity ProtectedOutput:PNP or NPN / NO or NCOutput Indications:Through LEDschannel Indication:LED indication for each channelResponse Time:On to Off : 10 - 15 m sec. Off to On : 50 - 100 m secNo of beams:4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64Beam By Pass:Provided in hand/body protection modelsProtected Heights:90 - 2000 mmPitch offered:11, 20, 30,40, 50, 90mmAdjustable Range:Up to 3 meters (Higher range up to 40 meters available)Standard Cable length:5 meters for emitter, 3 meters for receiverOperating Temperature:Up to 55 Degrees centigradeCross Section:36 x 42 mmElectrical Connections:Plug in Connector for Emitter & ReceiverApplicable to:Directly work with PLCs / ControllersProtections:Output short circuit protected.Vibration Resistance:Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave / minOperating ambient Light:500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degreesSuitable for:Machines with quick emergency stop

Product Details:

• Temp. Sensor Input : 1 NTC.

• General appliances like ice-cream machines, freezer etc.

• Temperature range -50°C to +50°C.
• 230VAC Standard. Other models with 12VDC, 24VDC, 110VAC on request.
• Panel cutout : 61 X 61 mm.

Product Details:

The RH110B series uses a highly accurate and reliable Thermoset Polymer based capacitance humidity sensor and Platinum RTD temperature sensor together with state-of-the-art digitallinearization and temperature compensated circuitry in an attractive, low prole enclosure to monitor room humidity & temperature levels.

Product Details:

The CMD5B Series Carbon Monoxide Detector uses an electrochemical sensor to monitor the carbon monoxide level and outputs a analog signal or a RS-485 network communication configured for either BACnet or ModBus protocol depending on model. On the analog models. A front panel LCD is standard to ensure easy setup and operation. It is available in either wall/surface or duct mount configurations and other standard features include a back light for the LCD, a front panel test switch, status indication and an alarm buzzer. The test function may also be controlled remotely with a digital input signal. The on-board menu allows local configuration of all device parameters. Optional features include one or two alarm relay outputs.

Features:

• Setup/calibration fully menu driven
• Selectable ranges of 0-100, 150, 300, 400 or 500 ppm
• Electrochemical sensing element
• Optional on board relays with field adjustable trip point.
• Optional BACnet or Modbus communications
• Powered by either AC or DC source with no change to circuit required.
• Choice of three field adjustable analog output signals, linearized over full range.
• Easy to calibrate in the field

Product Details:

The TE200B series single point duct temperature sensor utilizes a precision sensor encapsulated in a 6.35 mm (0.25”) OD, 304 series stainless steel probe and is available in various lengths (see ordering chart) All probes provide excellent heat transfer, fast response and resistance to moisture penetration. It is available with a variety of enclosures.

Product Details:

The TE200BB single point Greystone Duct Temperature Sensors utilizes a precision sensor encapsulated in a 6.35 mm (0.25”) OD, 304 series stainless steel probe and is available in various lengths (see ordering chart) All probes provide excellent heat transfer, fast response and resistance to moisture penetration. The TE200BB comes with an integrated mounting bracket and 10’ (3.05 m) of plenum rated cable for connection to the Building Automation System.

Product Details:

The TE200FD Flex duct temperature sensor utilizes several precision sensors space at equal distances. It is available in a variety of thermistors or RTD’s. The probe is FT6 plenum rated cable and is available in various lengths. All probes are constructed to provide excellent heat transfer and a fast response. It is available with a variety of enclosures.

Product Details:

The TE500AD series is an attractive, low proleenclosure that incorporates a precisionplatinum RTD and a transmitter that provides ahigh accuracy signal with excellent long-termstability, low hysteresis and fast response formeasurement of room temperatures.

Product Details:

Embicon offers Ultrasonic Level Sensor for level and distance measurement applications. The maximum range offered will be 2 meters and analog 4-20mA output. Teach facility for zero and span setting is offered. It is a built-in micro controller-based sensor which provides reading with better calibration.

Features:

• This non-contact type ultrasonic sensor is used for multiple applications like liquid level measurement, Hopper Level Measurement, Fill Level Monitoring, Material Handling, Proximity detection.

Product Details:

The TE500ES single point strap-on temperature transmitter has a precision platinum RTD bonded to a1.5” x 1.5” Aluminum plate and adhered to a 1“compressible foam. A 25.4 cm (10”) S/S Pipe clamp is provided to secure the assembly to various sizes of pipes. All probes are constructed to provide excellent heat transfer, fast response and are potted to resist moisture penetration. A transmitter that provides ahigh accuracy signal with excellent long term stability,low hysteresis and fast response is available with various ranges.

Product Details:

The NDD5B1100 Nitrogen dioxide detector uses a superior electrochemical sensor for reliability and accuracy in the most critical applications. The NDD provides a 3-wire sourcing 4-20 mA output as well asan alarm relay with three jumper selectable trip level settings.

Product Details:

Features:
High rated SPDT contacts Adjustable setpoint Adjustable Differential Direct switching of 240 Vac loads Full mechanical switching.

Product Details:

PGS100A is a compact gauge pressure transmitter complete with a 2 wire 4-20mA output, various pressure ranges, 1/4” NPT connection and 2 foot cable for electrical termination.

Features:

• 1/4” NPT
• NIST traceable calibration
• Weather resistant for harsh environments
• Fast response time
• Capacitance sensing element
• Ranges -14.7 through 10,000 PSIG (-101.4 through 68947.6 kPa)
• DC inputs, current output
• 17-4PH Stainless Steel has excellent corrosion resistance (comparable to grade 304 stainless)

Applications:

• HVAC Systems
• Energy Management Systems
• Steam Pressures
• Refrigerants and Ammonia
• Gas Chromatography
• Paint Spraying Systems
• Electronic Pressure Switch
• Heat Pumps
• Hydraulic Systems
• Irrigation Systems
• Compressor Control
• Propane

Product Details:

The air Pressure Switch is a general purpose airflow proving switch designed for HVAC and Energy Management applications. It may be used to sense positive, negative, or differential air pressure.

Features:

• The plated housing contains a diaphragm, a calibration spring and a snap-acting SPDT switch.
• An enclosure cover guards against accidental contact with the live switch terminal screws and the set point adjusting screw.The enclosure cover will accept a 12.7 mm (0.5") conduit connection.
• Optional pressure ranges and manual resets available.

Product Details:

The CDD3 Series CO2 Detector w/ BACnet® or Modbus Communciation - Environmental, industrial and commercial indoor Carbon Dioxide (CO2) gas detector comes standard in an attractive, low profile wall or duct mount enclosures and with optional add-on outputs for Temperature and/or Relative Humidity sensing all from one enclosure. Optional features also available are LCD, setpoint adjustment, momentary override, and alarm relay outputs. All parameters are communicated by either BACnet® or Modus communications

Features:

• Menu driven set-up
• 0-2000 PPM CO2 range
• BACnet® or Modbus Communication
• Patented self-calibration algorithm
• Guaranteed 5 year calibration interval
• Easily field calibrated
• Accepts AC/DC power

Product Details:

Greystone Outside Carbon Dioxide Detector the CDD4 Series CO2 transmitter uses a highly accurate and reliable Non-dispersive Infrared (NDIR) with state-of-the-art digital linearization and temperature compensated circuitry in an attractive, low profile enclosure for room applications and a duct mount version to detect CO2 levels and provides a linear analog, 0-5 or 0-10 Vdc signals. An optional LCD display is available that is fully programmable to show only the parameters required. Various precision thermistors or RTD’s are also available to as an optional output.

Features:

• Menu driven set-up
• 0-2000 or 20,000 PPM CO2 ranges
• Patented self-calibration algorithm
• Guaranteed 5 year calibration interval
• Optional Temperature Sensor Outputs
• Easily field calibrated

Product Details:

The CDD3 Series CO2 Detector w/ BACnet® or Modbus Communciation - Environmental, industrial and commercial indoor Carbon Dioxide (CO2) gas detector comes standard in an attractive, low profile wall or duct mount enclosures and with optional add-on outputs for Temperature and/or Relative Humidity sensing all from one enclosure. Optional features also available are LCD, setpoint adjustment, momentary override, and alarm relay outputs. All parameters are communicated by either BACnet® or Modus communications

Features:

• Menu driven set-up
• 0-2000 PPM CO2 range
• BACnet® or Modbus Communication
• Patented self-calibration algorithm
• Guaranteed 5 year calibration interval
• Easily field calibrated
• Accepts AC/DC power

Product Details:

The CDD5 Series Temperature/Humidity/CO2 transmitter incorporates three sensors in one attractive wall mount enclosure for the most efficient environmental monitoring and control system. It uses highly accurate and reliable Non-dispersive Infrared (NDIR), Thermoset Polymer based capacitance humidity sensor and curve matched thermistor combined with state-of-the-art digital linearization and temperature compensated circuitry in an attractive, low profile enclosure to monitor room CO2, humidity & temperature levels and provides a linear analog signal output of 4-20 mA, 0-5 or 0-10 Vdc signals. An optional LCD display is available that is fully programmable to show only the parameters required.

 

Features:

• Menu driven set-up
• 0-2000 PPM CO2 range
• Patented self-calibration algorithm
• Guaranteed 5 year calibration interval
• Temperature & Humidity Outputs
• Easily field calibrated

Product Details:

The TE500F, single point outside air temperature sensor utilizes a precision platinum RTD sensor. All probes are constructed to provide excellent heat transfer, fast response and are potted to resist moisture penetration. A sun and wind shield is integrated into the enclosure. It is provided in a weather proof ABS enclosure A transmitter that provides a high accuracy signal with excellent long term stability, low hysteresis and fast response is available with various ranges.

Product Details:

The NTRC Series Network Sensor features embedded BACnet and ModBus communication and is availablein several congurations for the most ecient monitoring and control solution. The basic unit accuratelymeasures room temperature. Optional features include RH measurement, up/down setpoint control, a localoverride function, a control relay output and a fan speed switch.The device connects to an RS-485 MS/TP network to oer a single-point solution for control of indoor air qualityand comfort. Features include a back-lit LCD and user menu for easy installation, eld-proven sensors and userinput controls to add local setpoint and override functions at the same network point.

Product Details:

The TSPC Greystone Room Temperature Sensors with resistive set point control is available in an attractive wall mount enclosure and can be congured with various options. It is available with various curve-matched thermistors or RTD sensors to measure temperature.A back-lit LCD displays room temperature, set point on demand and occupancy. Several operating parameters can be programmed using akey pad and on-board jumpers congure the °C/F display or disable the back light.Available options include a dry-contact override switch, a ve position fan speed switch and a jack for a network connection.

Product Details:

• Different type off gas measurements like Co2,O2,H2 etc.
• Four display Like weight, Pressure, Temperatures , level
• GSM mobile connectivity for wireless remote reading purpose.(sms)
• RS-485/232 communication is available for option.
• All channel are fully isolated with Transmitter power supply.
• Available in Flame Proof or SS Or MS outer box.

Product Details:

single point strap-on temperature sensor utilizes a precision sensor encapsulated

Product Details:

Grey Stone Strap On Temperature Transmitter with Display all probes provide excellent heat transfer, fast response and resist moisture penetration. A transmitter that provides a high accuracy signal with excellent long term stability, low hysteresis and fast response for measurement of pipe temperatures.

Product Details:

The TE511/512ES single point strap-on temperature sensor has a precision platinum RTD bonded to a 38.1 mm x 38.1 mm (1.5” x1.5” ) aluminum plate and adhered to a 1“compressible foam. A 10” S/S Pipe clamp isprovided to secure the assembly to various sizes of pipe.. All probes provide excellentheat transfer, fast response and resist moisture penetration. A transmitter that provides ahigh accuracy signal with excellent long termst ability, low hysteresis and fast response for measurement of pipe temperatures. A LCD isprovided in either °C (511) or °F (512).

Product Details:

The RH200 series uses a highly accurate and reliable Thermoset Polymer based capacitance humidity sensor and state-of-the-art digital linearization and temperature compensated circuitry to monitor humidity levels. A variety of enclosures are available. Additional options such, as integrated temperature sensor and LCD display are available.

Product Details:

The piezoresistive sensor is ideal for monitoring the pressure for air or otherclean inert gas and is limited only to those media which will not attack polyetherimide, silicon, uorosilicone,silicone, EPDM and neoprene seals. Monitoring of lter dierential pressure or VAV applications. The output signal isfactory calibrated and temperature compensated for highest startup accuracy and trouble-free operation. Available options include LCDs and integrated static pressure probe.

Product Details:

Greystone Liquid Pressure Transmitter high strength corrosive resistant stainless steel sensor construction. No silicone oil, no welds, no internal "O"rings. Compatible with a wide range of liquids and gases. Suitable for high shock and vibration applications.

Features:

• Excellent long-term stability and high accuracy
• Backlit LCD for display of differential or gauge pressure
• Jumper selectable LCD backlight for low power consumption applications
• Four switch selectable pressure ranges
• Jumper selectable output types, 4-20 mA, 0-5 and 0-10 Vdc
• NEMA 4X (IP65) enclosure
• Pushbutton and remote zeroing terminal
• Uni-directional or bi-directional pressure range selection switch
• High / low port swap switch to solve incorrect plumbing for differential
• Normal or slow surge damping switch to prevent false alarms and reduce noise
• Output polarity reverse switch

Applications:

• Pump Monitoring
• Filter Monitoring
• Chiller Monitoring
• HVAC Systems

Product Details:

The RH310 series uses a highly accurate and reliable Thermoset Polymer based capacitance humidity sensor and Platinum RTD temperature sensor together with state-of-the-art digital linearization and temperature compensated circuitry to monitor humidity levels. A 60 micron HDPE filter protects the sensor for contaminants. A hinged, gasketed weatherproof ABS enclosure provides easy of installation and protection from the elements.

Product Details:

The TSRC series is an attractive, low proleenclosure that incorporates a precisiontemperature sensor used to monitor roomtemperatures. Additional options are availablethat include setpoint adjustment, manualoverride, fan speed and LCD.

Product Details:

The T1 series thermowell are available in 304series or 316 series stainless steel. They areavailable in a wide range of lengths. Customlengths and materials are also available.

Product Details:

The CMD Series carbon monoxide detector uses anelectrochemical sensor to monitor the carbonmonoxide level and outputs a 4-20 mA signal. Thestandard product features a 2-wire loop-poweredoutput. Optionally, the device may be congured withan alarm relay and operates in 3-wire sourcing mode.Optional Modbus communications output is available.Environmental, industrial and commercial Carbon Monoxide (CO) gas detector.

 

Features:

• 4-20 mA, 2 wire loop-powered
• 0-300ppm for electrochemical (5%)
• Electrochemical sensing element
• Optional on board relay.
• Powered by either AC or DC source
• Easy to calibrate in the field

Application:

• To sense and transmit to any compatible electronic analog control, DDC/PLC controller or automation system for the control of ventilation equipment.